Biometrics Data
Biometrics information resource

 

Hand Geometry

This biometric approach uses the geometric form of the hand for confirming an individualís identity. Because human hands are not unique, specific features must be combined to assure dynamic verification.

Some hand-scan devices measure just two fingers, others measure the entire hand. These features include characteristics such as finger curves, thickness and length; the height and width of the back of the hand; the distances between joints and overall bone structure.

It should be noted that although the bone structure and joints of a hand are relatively constant traits, other influences such as swelling or injury can disguise the basic structure of the hand. This could result in false matching and non-false matching, however the amount of acceptable distinctive matches can be adjusted for the level of security needed.

To register in a hand-scan system a hand is placed on a readerís covered flat surface. This placement is positioned by five guides or pins that correctly situate the hand for the cameras. A succession of cameras captures 3-D pictures of the sides and back of the hand. The attainment of the hand-scan is a fast and simple process. The hand-scan device can process the 3-D images in 5 seconds or less and the hand verification usually takes less than 1 second. The image capturing and verification software and hardware can easily be integrated within standalone units. Hand-scan applications that include a large number of access points and users can be centrally administered, eliminating the need for individuals to register on each device.

 

Applications for Hand Scanning
Internationally, many airports use hand-scan devices to permit frequent international travelers to by-pass waiting lines for various immigration and customs systems.

Employers use hand-scan for entry/exit, recording staff movement and time/attendance procedures. This can go long way to eradicating the age old problem of buddy-clocking and other deceptive activities.

Combining Biometric Methods
Hand-scanning can be easily combined with other biometrics such as fingerprint identification. A system where fingerprints are used for infrequent identification and hand-scanning is used for frequent verification would create a two tiered structure. The hand-scan component used frequently allows identity verification or 1:1 (one to one) verification that ensures the user is who they claim they are. The fingerprint identification component used infrequently, confirms who the user is and accurately identifies the user in a 1:N (one to many) identification that is compared with numerous records.

Some anthropologists suspect that human intelligence has evolved due in large part to the shape of the hand.

While the hand hasn't changed much in a long time, it's now being put to a new use, to verify its owner's identity.

How it Works
Every hand is unique. Hand geometry scanners such as those made by Recognition Systems Inc. take over 90 measurements of the length, width, thickness, and surface area of the hand and four fingers--all in just 1 second.

The technology uses a 32,000-pixel CCD digital camera to record the hand's three-dimensional shape from silhouetted images projected within the scanner.

The scanner disregards surface details, such as fingerprints, lines, scars, and dirt, as well as fingernails, which may grow or be cut from day to day.

When a person uses the scanner, it compares the shape of the user's hand to a template recorded during an enrollment session. If the template and the hand match, the scanner produces an output--it may unlock a door, transmit data to a computer, verify identification, or log the person's arrival or departure time.

During enrollment, which takes approximately 30 seconds, the user places the right hand in the reader three times. The unit's internal processor and software convert the hand image to a 9-byte mathematical template, which is the average of the three readings.

The user's template may reside in internal memory (capable of holding over 27,000 users), or on other media such as a hard disk or smart card chip.

As opposed to such technologies as fingerprint, voice recognition, and facial recognition, where a multitude of vendors compete via their proprietary technology, hand geometry technology is dominated by one company, Recognition Systems, Inc. Finger geometry is led by Biomet Partners. 

RSI's method for capturing the biometric sample is fairly straightforward. To enroll, the users places his or her hand palm down on the reader's surface. The user then aligns his or her hand with the five pegs designed to indicate the proper location of the thumb, forefinger, and middle finger. Three placements are required to enroll on the unit; the enrollment template is a representation of the most relevant data from the three placements.

RSI's units use a 32,000-pixel CCD (charged coupled device) digital camera, inferring the length, width, thickness, and surface area of the hand and fingers from silhouetted images projected within the scanner. Over 90 measurements are taken, and the hand and fingers' characteristics are represented as a 9 byte template. source: Recognition Systems, Inc. Biomet Partners' technology is similar, but draws on the shape and characteristics of the index and middle finger. The data is saved as a 20 byte template. 

Hand geometry is a relatively accurate technology, but does not draw on as rich a data set as finger, face, or iris. A decent measure of the distinctiveness of a biometric technology is its ability to perform 1-to-many searches - that is, the ability to identify a user without the user first claiming an identity. Hand geometry does not perform 1-to-many identification, as similarities between hands are not uncommon. Where hand geometry does have an advantage is in its FTE (failure to enroll) rates, which measure the likelihood that a user is incapable of enrolling in the system. Fingerprint, by comparison, is prone to FTE's due to poor quality fingerprints; facial recognition requires consistent lighting to properly enroll a user. Since nearly all users will have the dexterity to use hand geometry technology, fewer employees and visitors will need to be processes outside the biometric. Hand geometry is occasionally misunderstood as "palm reading", as the placement of the hand palm-down on the reader can be confusing to the those unfamiliar with the technology.

Hand Geometry Strengths and Weaknesses

Strengths

Ease of use - the submission of the biometric is straightforward, and with proper training can be done with few misplacements. The only may be elderly clientele or those with arthritic hands, who may be unable to easily spread their fingers and place their hand on the unit's surface. The unit also works fairly well with dirty hands.

Resistant to fraud - short of casting a model of an enrolled person's hand and fingers, it would be difficult and time consuming to submit a fake sample. Since much of the value of hand scan is as a deterrent in time and attendance scenarios, it would rarely be worth the effort to attempt a fake submission.

Template size - Using RSI as the standard bearer of hand scan, a template size of 9 bytes is extremely small, orders of magnitude smaller than most other biometric technologies. By contrast, finger scan biometrics require 250-1000 bytes and voice scan biometrics commonly require 1500-3000 bytes. This facilitates storage of a large number of templates in a standalone device, which is how many hand scan devices are designed to work. It also facilitates card-based storage, as even magstripe cards have ample room for 9 byte samples.

User perceptions - as opposed to facial scan or eye-based technologies, which can encounter some resistance, the use of hand geometry is not problematic for the vast majority of users. It bears very little of the stigma of other authentication methods.

Weaknesses

Static design - as opposed to other biometrics, which can take advantage of technological breakthroughs like silicon development or camera quality, hand scan has remained largely unchanged for years. Its size precludes it from being used in most logical access scenarios, where compact design may be a prerequisite. 

Cost - hand scan readers cost approximately $1400-2000, placing them toward the high end of the physical security spectrum. Finger scan readers, whatever strengths and weaknesses they may have, can be much less expensive, in the $800-1200 range.

Injuries to hands - as with all biometrics, physiological changes can cause users to be rejected falsely. Injuries to hands are fairly common, and would make use of systems such as RSI's impossible.

Accuracy - although generally more reliable than behavioral biometrics such as voice or signature, hand geometry, in its current incarnation, cannot perform 1-to-many searches, but instead is limited to 1-to-1 verification. This limits its use in many different applications. 

 

Enhanced Biometric Technology
Recognition Systems Inc. significantly enhanced biometric technology for its hand scanners. By maintaining a low False Reject Rate (the probability that the device will reject an authorized user), while maintaining a high deterrent to unauthorized access, RSI's units process large numbers of people with minimal delays.

The crossover of False Reject and False Accept rates for RSI's hand geometry readers is 0.1%. These optimal error rates were documented in independent testing at Sandia National Laboratories. Subsequent field results from thousands of users and hundreds of thousands of transactions confirmed the Sandia findings.

Highest User Acceptance
Among biometric technologies, Sandia reported that hand geometry had the highest user acceptance of all devices tested. With a high level of security, ease of use, and non-threatening technology, hand geometry has become the most widely accepted biometric technology in use today.

Applications
RSI hand geometry scanners verify identity at the front entrances of over half the nuclear power plants in the U.S. At the 1996 Olympic Games, RSI's units were integrated with the Olympic Village security system to process millions of transactions, with minimum delay.

The U.S. Immigration and Naturalization Service (INS) uses RSI hand geometry scanners to allow over 60,000 frequent travelers to bypass immigration lines (through the INSPASS program).

The drastic reductions in cost of microprocessors in recent years has brought affordable hand geometry technology to the commercial market. Biometrics are no longer found only in nuclear power plants. Day care centers, athletic clubs, obstetrics wards, and police departments now use RSI's scanners.

Tomorrow will find ever-expanding applications for this thoroughly time-tested technology--for financial transactions, ticket-less travel, and new business and residential applications where high security is a major concern.

Hand geometry is currently among the most widely used biometric technologies, most suitable for access control and time and attendance applications. As opposed to more exotic biometric technologies, whose implementations may be quite few and far between, hand scan is used reliably at thousands of places of employment, universities, apartment buildings, and airports - anyplace requiring reasonably accurate, non-intrusive authentication. The nature of hand geometry technology is such that most projects are fairly small-scale and involve only a handful of readers, but there are some projects which incorporate dozens of readers.

Perhaps the most frequently used and most successful hand scan project is the INSPASS (Immigration and Naturalization Service Passenger Accelerated Service System) project, one which allows frequent travelers to circumvent long immigration lines at international airports in Los Angeles, Miami, Newark, N.J., New York City, Washington, San Francisco, Toronto, and Vancouver. Qualified passengers, after enrolling in the service, receive a magstripe card encoded with their hand scan information. Instead of being processed by passport control personnel, INSPASS travelers swipe their card, place their hand, and proceed with their I-94 to the customs gate. Nearly 50,000 people have enrolled in the service, and approximately 20,000 verifications take place every month. Travelers from 30 different countries are qualified to register for INSPASS; pending budgetary constraints, the near-term objective is to rollout the INSPASS project to over 20 airports in the U.S. 

Not yet implemented, but expected to begin at some point in 2000, is another high-profile hand scan project in Israel known informally as "Basel." Designed to control access to a road connecting the Gaza Strip and the West Bank, Basel will incorporate both hand scan and facial scan; an overriding objective in the design of this biometric system was to provide maximum security while allowing for authentication under challenging environmental conditions. Dozens of biometrically enabled turnstiles will feature proximity-based smart cards, hand scan readers, and cameras to perform facial scan matching. Although neither face nor hand is ideal for this application, the combination of the two allows for maximum efficiency in processing what will be over 30,000 Palestinian workers each day.The only major implementation of hand geometry by a vendor other than RSI is Disney's verification of season pass holders via two-finger geometry. This is both a convenience measure and a deterrent, as season pass holders are able to circumvent long lines but cannot give their season passes to friends

 

Hand Geometry Market Size

Though the technology for the biometric is mature, hand geometry is projected to be one of the slowed growing biometric technology through 2007. Because the range of applications in which hand geometry is typically limited to access control and time and attendance, it will draw a progressively smaller percentage of biometric revenues. Overall, hand geometry revenues are projected to grow from $27.7m in 2002 to $97.4m in 2007. Hand geometry revenues are expected to comprise approximately 2.5% of the entire biometric market. 

 

 

 

2005 © Copy right All rights reserved.

 

Content in this site has been taken from IBGweb, Find Biometrics and other resources, the copyrights are owned by the respective owners.